| my account | login-logout | resources | classroom help | tech support | catalog | home | get webcard |

Online Classroom

Post New Topic  New Poll  Post A Reply
search | help desk | commons
  next oldest topic   next newest topic
» Online Classroom   » Tech Support   » StarPilot   » Comparing a-values

Author Topic: Comparing a-values

 - posted November 29, 2002 02:18 PM      Profile for vjwilliams           Edit/Delete Post 
Comparing a-values

If you wish to compare a-values (intercepts) computed from tables by hand with those obtained from StarPilot (or any calculator or software) then you must use the Assumed Position for the DR position in StarPilot. If you do not, you will still get the same LOPs once plotted, but the a-values themselves will be different since you use different reference points. Hence if you want to see the same a-values, simply enter the AP used in the tables approach as the DR in the calculator and you should get the same values out.

All times are Pacific  
Post New Topic  New Poll  Post A Reply Close Topic    Move Topic    Delete Topic next oldest topic   next newest topic
Hop To:

Starpath School of Navigation

Copyright, 2003-2021, Starpath Corporation

Powered by Infopop Corporation