Author
|
Topic: Selecting a star in the TI Calculator sky display
|
David Burch
|
posted November 27, 2018 12:19 PM
Another note from Herman Dekker. Thank you Herman. Selecting a Star was extreme difficult for me, until I used a specific method. Put the crosshair aside the wanted
Star until the horizontal line is at the same height as the Star. Push the DOWN button once, with the left or
right buttons position the Vertical crosshair one pixel beside the Star. Now once push Up button and once the
Left or Right button to place the crosshair exact on the Star. Push Enter and you get the desired info of the Star.
From: Starpath, Seattle, WA
|
|
|